D-Link DCS-1000W User Manual - Page 16
Camera Name, Location, Admin, IP Assignment, Manually Assign - mac
View all D-Link DCS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Camera Name: This field is used for entering a descriptive name for the device. The default setting for the Camera Name is CS-xxxxxx, where xxxxxx is the last six digit of the MAC Address. The maximum length is 32 (Printable ASCII). Location: This field is used for entering a descriptive name for the location used by DCS-1000W. Admin: This field is used for entering the Administrator ID along with the password to access the System Administration settings. Be sure to enter the password twice to confirm the details once in the Admin Password field and again in the Confirm Password field. The default setting for Admin is blank (Null String) you need to key in the Admin ID with a maximum length of 12 (Printable ASCII) characters and enter the Admin Password with a maximum length of 8 (Printable ASCII) characters. It is highly recommended to set the Admin ID and Admin Password as soon as possible to ensure the highest possible security. IP Assignment: Important Information Access to DCS-1000W is done through assigning a proper IP address. Please make sure to use a vacant IP address when you assign the IP address for DCS1000W. This will prevent errors from occurring if the IP address is overlapped. There are two options to select from the IP Assignment either Manually Assign or Assign Automatically Using. Manually Assign You can click "Manually Assign" and directly enter the IP address. 15