D-Link DCS-1000W User Manual - Page 66
DCS-1000W must match with the Access Point's ESS-ID.
View all D-Link DCS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
A3: The wireless connection might be at fault. In ad-hoc mode make sure the DCS-1000W wireless channel and ESS-ID is set to match the PC/Notebook wireless channel and ESS-ID for direct communication. Since The DCS1000W ad-hoc mode supports two modes (802.11 ad-hoc mode and proprietary ad-hoc mode), make sure that you are using the same mode on each device. If they are not the same, the camera will not be accessible. Under infrastructure mode make sure the ESS-ID on the PC/Notebook and DCS-1000W must match with the Access Point's ESS-ID. Q: Why does the DCS-1000W work locally but not externally? A1: Might be caused from the firewall protection. Check the Internet firewall with your system administrator. The firewall may need to have some settings changed in order for the DCS-1000W to be accessible outside your local LAN. A2: Make sure that the DCS-1000W isn't conflicting with any web server you may have running on your network. A3: The default router setting might be a possible reason. Check that the configuration of the router settings allow the DCS-1000W to be accessed outside your local LAN. Q: Why does a series of broad vertical white line appear through out the image? A: It could be that the CMOS sensor has become overloaded when it has been exposed to bright lights such as direct exposure to sunlight or halogen lights. Reposition the DCS-1000W into a more shaded area immediately as prolonged exposure to bright lights will damage the CMOS sensor. Q: The focus on the DCS-1000W is bad, how can I correct it? A1: Adjust the DCS-1000W focus manually as described in "Adjusting the DCS-1000W Focus" in the Appendix section of this manual. A2: If you have previously changed the supplied CS-type lens, you may have unintentionally installed a C-type lens without fitting the adaptor first. Q: Noisy images occur. How can I solve the problem? A1: The video images might be noisy if the DCS-1000W is used in a very low light environment. To solve this issue you need more lighting. 65