D-Link DCS-1000W User Manual - Page 21
Loading ActiveX From, Open Second Port - ocx
View all D-Link DCS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Loading ActiveX From: This field is used to specify the location of Xplug Control (ActiveX) plug-in program. Enter the information as required in .ocx format, for example: http://www..com/xplug.ocx where must be replaced with your company's DNS server. Instructions for installing ActiveX from the driver CD is included in this manual. Refer to the section labeled "Software Installation". Open Second Port: The Web Server field allows settings to open a second port for the DCS1000W. This will permit users of IP Sharing Gateways to support multiple DCS-1000Ws. By default Port 80 is always opened for DCS-1000W Web Server access. Select "Yes" and input the second port value. For example: If you have 5 Internet Cameras to be installed, each with an IP address from 192.168.0.101 192.168.0.102 192.168.0.103 192.168.0.104 192.168.0.105 You can open the second port for each Internet Camera from port 81 to Port 85 as illustrated below: DCS-1000W 1 - IP 192.168.0.101, second web port 81 DCS-1000W 2 - IP 192.168.0.102, second web port 82 DCS-1000W 3 - IP 192.168.0.103, second web port 83 DCS-1000W 4 - IP 192.168.0.104, second web port 84 DCS-1000W 5 - IP 192.168.0.105, second web port 85 You also need to setup your DSL gateway for Port Mapping. Port 81 map to 192.168.0.101 Port 82 map to 192.168.0.102 Port 83 map to 192.168.0.103 Port 84 map to 192.168.0.104 Port 85 map to 192.168.0.105 20