D-Link DCS-1000W User Manual - Page 28
Sender e-mail, Receiver e-mail, Sending Interval, Sending Time, Trigger I/O Output, Cancel, Warning
View all D-Link DCS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
address in this field. • Sender e-mail is the person's e-mail address that will be sending the e-mail. • Receiver e-mail is the e-mail address of the person that will receive the e-mail. • Sending Interval is the period of time between each e-mail being sent to the receiver. If the setting is at 10 seconds, a new e-mail will be sent in 10 seconds interval to the receiver. • Sending Time is the number of times the e-mail will be sent to the receiver before it terminates. Select "Trigger I/O Output" and enter the setting for the duration of the output device for Output 1 time and Output 2 time in seconds. I/O Input 2 Trigger: Refer to "I/O Input 1 Trigger" information above. Save/Cancel: After making sure all settings in the System are correct, click on the "Save" icon to store the settings for the DCS-1000W. You can alternatively click on the "Cancel" icon to restore all settings to the values last saved to or retrieved from DCS-1000W. Warning When connecting other devices through the I/O connectors, please make sure the maximum current of 100mA is strictly observed. Any failure to do so might cause a loss of power to DCS-1000W and possibly cause serious damage to the Internet Camera. Please refer to the appendix for detailed information regarding the I/O Connector. 27