D-Link DCS-1000W User Manual - Page 17
Assign Automatically Using, Wireless Interface - user manual
View all D-Link DCS-1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
The default settings are as follows: § Default IP - 192.168.0.20 § Subnet Mask - 255.255.255.0 § Default Gateway - 0.0.0.0 Assign Automatically Using Important Information It is recommended that you do not use an Automatically Assigned IP address as it may be difficult to determine the IP address of the unit after the IP address has been assigned. It is recommended that an IP address be assigned manually. If your network is using RARP, BOOTP or DHCP server you can click "Assign Automatically Using" and click on "RARP", "BOOTP" or "DHCP" . Under this setting DCS-1000W will automatically assign an IP address from RARP, BOOTP or DHCP server. Each time the DCS-1000W starts up be sure the RARP, BOOTP or DHCP server is setup as assign a static IP to your DCS-1000W. If your application requires a direct connection from an ADSL modem through the DCS-1000W's RJ-45 LAN port and you also have an ISP PPPoE account, click on the "PPPoE" option and enter the Service Name, User ID and Password into the respective fields. The DCS-1000W will get an IP address from the ISP each time DCS-1000W starts up when Assign Automatically is used. DNS IP Address: DNS (Domain Name System) server is an Internet service that translates domain names (ie. www.dlink.com) into IP addresses (ie. 192.168.0.20). The DNS IP address can be received from your ISP. Enter at least one DNS IP Address. Wireless Interface: Connection Mode: Use the Connection Mode to determine the type of wireless communication for the DCS-1000W. There are three choices of Infrastructure mode , 802.11 Adhoc mode and Adhoc mode . The default setting for the Connection Mode is Infrastructure. 16