D-Link DCS-2100G Product Manual - Page 95
Green, Blink, event is triggered.
UPC - 790069274008
View all D-Link DCS-2100G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
DCS-2100G User's Manual Using IP Surveillance Software There is a unique light signal associated with each channel number. It indicates the status of the dedicated video channel, which is depicted as follows: Off: Green: Red: Blink: The video channel is not connected with any DCS-2100G yet. The green light means the DCS-2100G associated with this channel number is connected, and the video is monitored in the video area. The red light indicates the video from this channel is recording into the video database. In this mode, you don't have to drag and drop the channel to the video area. This means that this application software supports real-time recording with and without real-time monitoring for the dedicated video channel. With the motion detection mechanism set in the DCS-2100G, the light of the corresponding channel will blink once the motion event is triggered. If you do not want to monitor one video, you can drag and drop the video (in the video area) to the trashcan in the common control area of the monitor program. The following section will demonstrate the procedures for "drag and drop" step-by-step. D-Link Systems, Inc. 95