D-Link DGS-3620-52P Web UI Reference Guide - Page 116
IGMP Snooping Static Group Settings
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Figure 4-57 IGMP Snooping Rate Limit Settings window The fields that can be configured are described below: Parameter Description Port List Enter the port list used for this configuration. VID List Enter the VID list used for this configuration. Rate Limit (11000) Enter the IGMP snooping rate limit used. By selecting the No Limit check box, the rate limit for the entered port(s) will be ignored. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IGMP Snooping Static Group Settings Users can view the Switch's IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Static Group Settings, as show below: Figure 4-58 IGMP Snooping Static Group Settings window The fields that can be configured are described below: Parameter Description VLAN Name The VLAN Name of the multicast group. VID List The VID List or of the multicast group. IPv4 Address Enter the IPv4 multicast address. Click the Find button to locate a specific entry based on the information entered. 106