D-Link DGS-3620-52P Web UI Reference Guide - Page 135

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Figure 4-89 MLD Snooping Multicast VLAN Group List Settings window The fields that can be configured are described below: Parameter Description Profile Name Use the drop-down menu to select the IGMP Snooping Multicast VLAN Group Profile name. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specific entry. Click the Show MLD Snooping Multicast VLAN Entries link to view the MLD Snooping Multicast VLAN Settings. Multicast Filtering IPv4 Multicast Filtering IPv4 Multicast Profile Settings Users can add a profile to which multicast address(s) reports are to be received on specified ports on the Switch. This function will therefore limit the number of reports received and the number of multicast groups configured on the Switch. The user may set an IPv4 Multicast address or range of IPv4 Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the specified switch ports. To view the following window, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Multicast Profile Settings, as show below: Figure 4-90 IPv4 Multicast Profile Settings window The fields that can be configured are described below: Parameter Description Profile ID (1-60) Enter a Profile ID between 1 and 60. Profile Name Enter a name for the IP Multicast Profile. Click the Add button to add a new entry based on the information entered. Click the Find button to locate a specific entry based on the information entered. Click the Delete All button to remove all the entries listed. 125