D-Link DGS-3620-52P Web UI Reference Guide - Page 29
System Log, Configuration > System Log Configuration > System Log
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Figure 2-13. System Log Server Settings The fields that can be configured are described below: Parameter Description Server ID Syslog server settings index (1 to 4). Severity Use the drop-down menu to select the higher level of messages that will be sent. All messages which level is higher than selecting level will be sent. The options are Emergency(0), Alert(1), Critical(2), Error(3), Warning(4), Notice(5), Informational(6) and Debug(7). Server IPv4 Address The IPv4 address of the Syslog server. Server IPv6 Address The IPv6 address of the Syslog server. Facility Use the drop-down menu to select Local 0, Local 1, Local 2, Local 3, Local 4, Local 5, Local 6, or Local 7. UDP Port Type the UDP port number used for sending Syslog messages. The default is 514. (514 or 6000-65535) Status Choose Enabled or Disabled to activate or deactivate. Click the Apply button to accept the changes made. Click the Delete All button to remove all servers configured. System Log Users can view and delete the local history log as compiled by the Switch's management agent. To view the following window, click System Configuration > System Log Configuration > System Log, as show below: Figure 2-14. System Log window The Switch can record event information in its own log. Click Go to go to the next page of the System Log window. The fields that can be configured or displayed are described below: 19