D-Link DGS-3620-52P Web UI Reference Guide - Page 163

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Figure 5-1 IPv4 Static/Default Route Settings window The fields that can be configured are described below: Parameter Description IP Address This field allows the entry of an IPv4 address to be assigned to the Static route. Tick the Default check box to be assigned to the default route. Netmask This field allows the entry of a subnet mask to be applied to the corresponding subnet mask of the IP address. IP Tunnel Name Tick the IP Tunnel check box and enter the IP tunnel name used. Gateway This field allows the entry of a Gateway IP Address to be applied to the corresponding gateway of the IP address. Metric (1-65535) Represents the metric value of the IP interface entered into the table. This field may read a number between 1 and 65535. Backup State Each IP address can only have one primary route, while another route should be assigned to the backup state. When the primary route fails, the switch will try the backup route. The field represents the Backup state that the Static and Default Route is configured for. Null Interface Use the drop-down menu to enable or disable the null interface as the next hop. Click the Apply button to accept the changes made. IPv4 Route Table The IP routing table stores all the external routes information of the switch. This window displays all the external route information on the Switch. To view the following window, click L3 Features > IPv4 Route Table, as show below: Figure 5-2 IPv4 Route Table window The fields that can be configured are described below: 153