D-Link DGS-3620-52P Web UI Reference Guide - Page 157

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Figure 4-119 PTP Port Settings window The fields that can be configured are described below: Parameter Description From Port / To Port Select the port range to use for this configuration. State Use the drop-down menu to enable or disable the PTP clock state on the specified ports. Click the Apply button to accept the changes made. PTP Boundary Clock Settings This window is used to configure the PTP boundary clock attributes and requires at least one parameter to execute. To view this window, click L2 Features > PTP > PTP Boundary Clock Settings, as shown below: Figure 4-120 PTP Boundary Clock Settings window The fields that can be configured are described below: Parameter Description Priority 1 (0-255) Priority 2 (0-255) This is used in the execution of the best master clock algorithm. Lower values take precedence. The range is from 0 to 255. Zero indicates the highest precedence. This is used in the execution of the best master clock algorithm. Lower values take precedence. In the event that the operation of the BMC algorithm fails to order the clocks based on the values of Priority1, the clock's class and the clock's accuracy; the Priority 2 will allow the creation of lower values compared to the other devices. The 147