D-Link DGS-3620-52P Web UI Reference Guide - Page 258

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide Click the View Detail link to view more information regarding the specific entry. Click the Delete button to remove the specific entry. Click the View Detail link to see the following window. Figure 5-12942 BGP Community Rule Settings - View Detail window The fields that can be configured are described below: Parameter Description Mode Use the drop-down menu to permit or deny the routes if rule is matched. Regular Expression Enter the community set value. This value can be up to 80 characters long. Regular Option Tick the check boxes to select the regular options. Internet - Routes with this community will be sent to all peers either internal or external. Local AS - Routes with this community will be sent to peers in the same AS, but will not be sent to peers in another sub AS in the same confederation and to the external peers. No Advertise - Routes with this community will not be advertised to any peer either internal or external. No Export - Routes with this community will be sent to peers in the same AS or in other sub Autonomous Systems within a confederation, but will not be sent to an external BGP (eBGP) peer. Community Set (1-65535) A community is 4 bytes long, including the 2 bytes's for the Autonomous System's number and 2 bytes for the network number This value is configured with two 2-byte numbers separated by a colon. The valid range of both number are from 1 to 65535. A community set can be formed by multiple communities, separated by a comma. Click the Apply button to accept the changes made. Click the BGP Trap Settings, as shown below: Figure 5-13043 BGP Trap Settings window 248