D-Link DIR-412 Product Manual - Page 29
Dynamic IP Address DHCP - d link default ip address
UPC - 790069332029
View all D-Link DIR-412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Section 3 - Configuration Manual Configuration (WAN Mode) Dynamic IP Address (DHCP) Choose Dynamic IP (DHCP) from the My Internet Connection is drop-down menu if all WAN IP information is obtained from your ISP. Host Name: The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. DNS Addresses: Enter the Primary and Secondary DNS server IP addresses assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-412 User Manual 25