D-Link DIR-412 Product Manual - Page 78

Configure WPA-Enterprise RADIUS - wpa setup

Get D-Link DIR-412 PDF manuals and user guides
UPC - 790069332029
View all D-Link DIR-412 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Section 4 - Security Configure WPA-Enterprise (RADIUS) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side and then click the Manual Wireless Network Setup button. 2. Select Enable WPA/WPA2 Wireless Security (Enhanced) from the Security Mode drop-down menu. 3. Select Auto(TKIP/AES), TKIP, or AES from the Cipher Type drop-down menu. If you have wireless clients that use both types, use TKIP/ AES. 4. Select EAP from the PSK / EAP drop-down menu. 5. Enter the IP Address of your RADIUS server in the RADIUS Server IP Address field. 6. Enter the port you are using with your RADIUS server in the Port field. 7. Enter the security key in the Shared Secret field. 8. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-Enterprise (RADIUS) on your adapter and enter the same passphrase as you did on the router. D-Link DIR-412 User Manual 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
74
D-Link DIR-412 User Manual
Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1.
Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on
Setup
and then click
Wireless Settings
on the left side and then click the
Manual Wireless Network Setup
button.
2. Select
Enable WPA/WPA2 Wireless Security (Enhanced)
from the
Security Mode
drop-down menu.
3. Select
Auto(TKIP/AES)
,
TKIP
, or
AES
from the
Cipher Type
drop-down
menu. If you have wireless clients that use both types, use
TKIP/
AES
.
4. Select
EAP
from the
PSK / EAP
drop-down menu.
5. Enter the IP Address of your RADIUS server in the
RADIUS Server IP Address
field.
6. Enter the port you are using with your RADIUS server in the
Port
field.
7. Enter the security key in the
Shared Secret
field.
8. Click
Save Settings
to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity
until you enable WPA-Enterprise (RADIUS) on your adapter and enter the same passphrase as you did on the router.