D-Link DSN-656 User Manual - Page 21
Installation, Installation Overview, Drive Slot Numbering
View all D-Link DSN-656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation D-Link Document - User Manual 2 Installation Overview Before starting, prepare the following items: A management computer with a Gigabit Ethernet NIC (recommend) on the same network as the D-Link storage system. Connection cables: 。 Use CAT 5e, or CAT 6 (recommend) network cables for the management port. Prepare a storage system configuration plan. The plan should include network information for the management port and iSCSI data ports. If using static IP addresses, please prepare a list of the static IP addresses, the subnet mask, and the default gateway. Switches 。 DSN-6200: Gigabit switches (recommended) or Gigabit switches with VLAN / LCAP / Trunking (optional). 。 DSN-6500: Gigabit switches (recommended) or 10 Gigabit switches with VLAN / LCAP / Trunking (optional). CHAP security information, including CHAP username and password (optional). For dual-controller systems, it is recommended that the host logon to the target twice (both Controller 1 and Controller 2), and then the MPIO should setup automatically. For an iSCSI dual-controller system, install an iSNS server on the same storage area network (recommended). Drive Slot Numbering The drives can be installed into any slot in the enclosure. Slot numbering is reflected in Web UI. 2U12: Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7 Slot 8 Slot 9 Slot 10 Slot 11 Slot 12 Copyright@2014 D-Link System, Inc. All Rights Reserved. 21