D-Link DSN-656 User Manual - Page 86
Firmware Synchronization (Only available in Dual controller models), Controller Module Firmware Update
View all D-Link DSN-656 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
D-Link Document - User Manual The options available on this tab are: Controller Module Firmware Update: Please prepare new controller firmware file named "xxxx.bin" in local hard drive, then click Browse to select the firmware file. Click the Apply button, it will pop up a warning message, click the OK button to start upgrading the firmware. When upgrading, there is a progress bar running. After finished upgrading, the system must reboot manually to make the new firmware take effect. JBOD Firmware Update: To upgrade JBOD firmware, choose a JBOD first, the other steps are the same as controller firmware update. Controller mode: This option can be modified to dual or single here. If the system installs only one controller, switch this mode to Single, and then click Apply button. Firmware Synchronization (Only available in Dual controller models) The Firmware Synchronization tab is used on dual controller systems to synchronize the controller firmware versions when the firmware of the master controller and the slave controller are different. The firmware of the slave controller is always changed to match the firmware of the master controller. It doesn't matter if the firmware version of the slave controller is newer or older than that of the master. Normally, the firmware versions in both controllers are the same. Copyright@2014 D-Link System, Inc. All Rights Reserved. 86