D-Link DWS-3024L User Manual - Page 164

D-Link Unified Access System User Manual Table 55 describes the QoS settings you can configure. Table 55. QoS Settings Field Queue AIFS (Inter-Frame Space) cwMin (Minimum Contention Window) cwMax (Maximum Contention Window) Description Queues are defined for different types of data transmitted from AP-tostation: Data 0 (Voice) High priority queue, minimum delay. Time-sensitive data such as VoIP and streaming media are automatically sent to this queue. Data 1(Video) High priority queue, minimum delay. Time-sensitive video data is automatically sent to this queue. Data 2 (best effort) Medium priority queue, medium throughput and delay. Most traditional IP data is sent to this queue. Data 3 (Background) Lowest priority queue, high throughput. Bulk data that requires maximum throughput and is not time-sensitive is sent to this queue (FTP data, for example). The Arbitration Inter-Frame Spacing (AIFS) specifies a wait time (in milliseconds) for data frames. Valid values for AIFS are 1 through 255. This parameter is input to the algorithm that determines the initial random backoff wait time ("window") for retry of a transmission. The value specified here in the Minimum Contention Window is the upper limit (in milliseconds) of a range from which the initial random backoff wait time is determined. The first random number generated will be a number between 0 and the number specified here. If the first random backoff wait time expires before the data frame is sent, a retry counter is incremented and the random backoff value (window) is doubled. Doubling will continue until the size of the random backoff value reaches the number defined in the Maximum Contention Window. Valid values for the "cwmin" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023. The value for "cwmin" must be lower than the value for "cwmax". The value specified here in the Maximum Contention Window is the upper limit (in milliseconds) for the doubling of the random backoff value. This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached. Once the Maximum Contention Window size is reached, retries will continue until a maximum number of retries allowed is reached. Valid values for the "cwmax" are 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023. The value for "cwmax" must be higher than the value for "cwmin". 164 © 2001- 2008 D-Link Corporation. All Rights Reserved.