D-Link DWS-3024L User Manual - Page 174
Configuring Users in the Local Database, Configuring Users in a Remote RADIUS Server
View all D-Link DWS-3024L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
D-Link Unified Access System User Manual Configuring Users in the Local Database From the Local User Configuration page, you can configure additional settings for an existing CP user in the local database. Figure 79. Local User Configuration Table 60 describes the fields you use to configure CP users in the local database. Table 60. Local User Configuration Field User Name Password User Group Session Timeout Idle Timeout Description Enter the name of the user. Enter a password for the user. The password length can be from 8 to 64 characters. Assign the user to at least one User Group. To assign a user to more than one group, press the Ctrl key and click each group. New users are assigned to the 1-Default user group by default. Enter the number of seconds a user is permitted to remain connected to the network. Once the Session Timeout value is reached, the user is logged out automatically. A value of 0 means that the user does not have a Session Timeout limit. Enter the number of seconds the user can remain idle before the switch automatically logs the user out. A value of 0 means that the user does not have an idle timeout limit. Configuring Users in a Remote RADIUS Server You can use a remote RADIUS server client authorization. You must add all users to the RADIUS server. The local database in the D-Link Unified Switch does not share any information with the remote RADIUS database. Table 61 indicates the RADIUS attributes you use to configure authorized captive portal clients. The table indicates both RADIUS attributes and vendor-specific attributes (VSA). VSAs are denoted in the Attribute column and are comma delimited (vendor id, attribute id). 174 © 2001- 2008 D-Link Corporation. All Rights Reserved.