D-Link DWS-3024L User Manual - Page 186
SNMP Trap Configuration, SNMP Trap Configuration
View all D-Link DWS-3024L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
D-Link Unified Access System User Manual SNMP Trap Configuration Use the SNMP Trap Configuration page to configure whether or not SNMP traps are sent from the Captive Portal and to specify captive portal events that will generate a trap. All CP SNMP traps are disabled by default. To configure SNMP trap settings for various captive portal features, click Security > Captive Portal > SNMP Trap Configuration. Figure 90. SNMP Trap Configuration Table 72 describes the events that generate SNMP traps when the status is Enabled. Table 72. SNMP Trap Configuration Field Captive Portal Trap Mode Client Authentication Failure Traps Client Connection Traps Client Database Full Traps Client Disconnection Traps Description Choose one of the following captive portal trap modes: • Select Enable to allow the SNMP agent on the switch to generate captive portal SNMP traps that are enabled. • Select Disable to prevent the SNMP agent on the switch from generating any captive portal SNMP traps, even if they are individually enabled. If you enable this field, the SNMP agent sends a trap when a client attempts to authenticate with a captive portal but is unsuccessful. If you enable this field, the SNMP agent sends a trap when a client authenticates with and connects to a captive portal. If you enable this field, the SNMP agent sends a trap each time an entry cannot be added to the client database because it is full. If you enable this field, the SNMP agent sends a trap when a client disconnects from a captive portal. 186 © 2001- 2008 D-Link Corporation. All Rights Reserved.