D-Link DWS-3160-24TC DWS-3160 Series Hardware Installation Guide - Page 19
Do NOT use the DWS-3160-24PC Switch with any Redundant Power System other
View all D-Link DWS-3160-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Figure 2- 6. Connecting the DWS-3160-24PC to the DPS-700 To connect the DPS-700 to the Switch for the first time, follow these steps: 1. Disconnect the power cable from the power connector of the Switch. 2. Interlink the RPS ports of the Switch and the DPS-700 by using the 22-pin DC power cable, supplied with the RPS. 3. Interlink the Power connector, of the DPS-700, and the grounded electrical outlet by using a standard AC power cable. A green LED on the front of the DPS-700 will illuminate to indicate a successful connection. 4. Reconnect the power cable to the power connector of the Switch. 5. No software configuration is needed for this installation. CAUTION: Do NOT use the DWS-3160-24PC Switch with any Redundant Power System other than the DPS-700. 11