D-Link DWS-3160-24TC DWS-3160 Series Hardware Installation Guide - Page 27
Connecting to the Switch for the first time, Username, Password, Enter, DWS-3160-24PC:admin
View all D-Link DWS-3160-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide Boot Procedure V1.00.001 Power On Self Test 100 % MAC Address : 00-11-22-33-45-67 H/W Version : A1 Please Wait, Loading V1.00.037 Runtime Image UART init Starting runtime image Device Discovery Configuration init 100 % 100 % 100 % 100 % Figure 4- 3. Boot up display in console screen After the boot sequence has been completed, the console login screen will be displayed. Connecting to the Switch for the first time The Switch supports user-based security that can allow prevention of unauthorized users from accessing the Switch or changing its settings. This section will explain how to log into the Switch's Command Line Interface via the out-ofband console connection. Upon initial connection to the Switch, the login screen appears (see example below). DWS-3160-24PC Gigabit Ethernet Switch Command Line Interface Firmware: Build 1.00.037 Copyright(C) 2011 D-Link Corporation. All rights reserved. UserName: PassWord: DWS-3160-24PC:admin# Figure 4- 4. The Switch's Login Screen By default, there is no Username and Password configured in the account settings of this Switch. This will allow the user to simply connect to this Switch for the first time by pressing the 'Enter' key twice. After press Enter for both the Username and Password fields, access will be given to enter commands after the command prompt (DWS-3160-24PC:admin#) appears. NOTE: The first user automatically gets Administrator level privileges. At least one Admin-level user account must be created for the Switch. 19