Dell 1133 Mono Laser User's Guide (HTML) - Page 38
Media and tray
View all Dell 1133 Mono Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Media and tray This chapter provides information on how to load originals and print media into your machine. This chapter includes: Preparing originals Loading originals Selecting print media Changing the tray size Loading paper in the tray Printing on special media Setting the paper size and type Using the output support Preparing originals Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches). Do not attempt to load the following types of paper, in order to prevent paper jam, low print quality, and machine damage. Carbon-paper or carbon-backed paper Coated paper Onion skin or thin paper Wrinkled or creased paper Curled or rolled paper Torn paper Remove all staples and paper clips before loading. Make sure any glue, ink, or correction fluid on the paper is completely dry before loading. Do not load originals that include different sizes or weights of paper. Do not load booklets, pamphlets, transparencies, or documents with other unusual characteristics. Loading originals You can use the scanner glass to load an original for copying and scanning. 1. Lift and open the scanner lid. 2. Place the original face down on the scanner glass. And align it with the registration guide at the top left corner of the glass.