Dell 1133 Mono Laser User's Guide (HTML) - Page 47
Using the output support, Stacking papers firmly, Getting a small-sized printout
View all Dell 1133 Mono Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3. Press the left/right arrow until Paper Setup appears and press OK. 4. Press the left/right arrow until Paper Source appears and press OK. 5. Press the left/right arrow to select the paper tray you want. 6. Press OK to save the selection. 7. Press Stop/Clear ( ) to return to ready mode. Using the output support The surface of the output tray may become hot if you print a large number of pages at once. Make sure that you do not touch the surface, and do not allow children near it. The printed pages stack on the output support, and the output support will help the printed pages to align. The printer sends output to the output tray by default. To use the output tray, make sure that the rear cover is closed. If you are using A5 paper, fold the output tray. Otherwise, printed pages might be mis-aligned or jammed. Stacking papers firmly If you use the machine in a humid area, or use a print media that is damp because of high humidity, the print-outs on the output tray may be curled and may not be stacked properly. In this case, you can set the machine to use the Paper Stacking function to let print-outs be stacked firmly. But, using this function will make the print speed slow. 1. Press Menu ( ) on the control panel. 2. Press the left/right arrow until System Setup appears and press OK. 3. Press the left/right arrow until Maintenance appears and press OK. 4. Press the left/right arrow until Paper Stacking appears and press OK. 5. Press the left/right arrow until On appears and press OK. 6. Press Stop/Clear ( ) to return to ready mode. Getting a small-sized printout When you have printed a small-sized printout like an envelope or a custom-sized printout, it may not be placed on the output support, due to its small size. In this case, pull up the scan unit, get the printout, and close the scan unit again for future use.