Dell Alienware x15 R2 Service Manual - Page 31
Rear-I/O cover, Removing the rear I/O-cover
View all Dell Alienware x15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Steps 1. Align and place the left fan into the slot on the palm-rest and keyboard assembly. 2. Adhere the left fan cable to the system board and connect the left fan cable to the system board. 3. Replace the three screws (M2x4) that secure the left fan to the palm-rest and keyboard assembly. 4. Route the speaker cable and the antenna cable through the routing guides on the left fan. 5. Align and place the right fan into the slot on the palm-rest and keyboard assembly. 6. Connect the right fan cable to the system board. 7. Replace the three screws (M2x4) that secure the right fan to the palm-rest and keyboard assembly. 8. Route the speaker cable and antenna cable through the routing guides on the right fan. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Rear-I/O cover Removing the rear I/O-cover Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 31