Dell Alienware x15 R2 Service Manual - Page 35

Headset port, Removing the headset port

Get Dell Alienware x15 R2 PDF manuals and user guides View all Dell Alienware x15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Steps 1. Align and place the power-adapter port into the slot on the palm-rest and keyboard assembly. 2. Adhere the power-adapter port cable to the fan and heat-sink assembly. 3. Connect the power-adapter port cable to the system board. 4. Route the power-adapter port cable through the routing guides on the fan and heat-sink assembly. 5. Place the power-adapter port bracket on the power-adapter port. 6. Align the screw holes on the power-adapter port bracket with the screw holes on the palm-rest and keyboard assembly. 7. Replace the two screws (M2.5x3.5) that secure the power-adapter port bracket to the palm-rest and keyboard assembly. Next steps 1. Install the rear I/O-cover. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Headset port Removing the headset port Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the rear I/O-cover. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Steps
1.
Align and place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2.
Adhere the power-adapter port cable to the fan and heat-sink assembly.
3.
Connect the power-adapter port cable to the system board.
4.
Route the power-adapter port cable through the routing guides on the fan and heat-sink assembly.
5.
Place the power-adapter port bracket on the power-adapter port.
6.
Align the screw holes on the power-adapter port bracket with the screw holes on the palm-rest and keyboard assembly.
7.
Replace the two screws (M2.5x3.5) that secure the power-adapter port bracket to the palm-rest and keyboard assembly.
Next steps
1.
Install the
rear I/O-cover
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Headset port
Removing the headset port
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
rear I/O-cover
.
35