Dell Alienware x15 R2 Service Manual - Page 37
Steps, Next steps
View all Dell Alienware x15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1. Slide the headset port into the slot on the palm-rest and keyboard assembly. 2. Align the headset port into the slot on the palm-rest and keyboard assembly. 3. Adhere the headset-port cable to the fan and heat-sink assembly. 4. Route the headset-port cable through the routing guides on the fan and heat-sink assembly. 5. Connect the headset-port cable to the system board. 6. Route the I/O-board cable through the routing guides on the fan and heat-sink assembly. 7. Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable. 8. Adhere the tape that secures the I/O-board cable to the system board. Next steps 1. Install the rear I/O-cover. 2. Install the base cover. 37
Steps
1.
Slide the headset port into the slot on the palm-rest and keyboard assembly.
2.
Align the headset port into the slot on the palm-rest and keyboard assembly.
3.
Adhere the headset-port cable to the fan and heat-sink assembly.
4.
Route the headset-port cable through the routing guides on the fan and heat-sink assembly.
5.
Connect the headset-port cable to the system board.
6.
Route the I/O-board cable through the routing guides on the fan and heat-sink assembly.
7.
Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
8.
Adhere the tape that secures the I/O-board cable to the system board.
Next steps
1.
Install the
rear I/O-cover
.
2.
Install the
base cover
.
37