Dell Alienware x17 R2 Service Manual - Page 17

Memory module, Removing the memory module

Get Dell Alienware x17 R2 PDF manuals and user guides View all Dell Alienware x17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Steps 1. Connect the battery cable to the system board. 2. Slide the tabs on the top of the base cover under the rear I/O-cover and snap the base cover to the palm-rest and keyboard assembly. 3. Tighten the four captive screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly. 4. Replace the two screws (M2.5x9) that secure the base cover to the palm-rest and keyboard assembly. 5. Replace the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly. Next steps 1. Follow the procedure in After working inside your computer. Memory module Removing the memory module Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Steps
1.
Connect the battery cable to the system board.
2.
Slide the tabs on the top of the base cover under the rear I/O-cover and snap the base cover to the palm-rest and keyboard
assembly.
3.
Tighten the four captive screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
4.
Replace the two screws (M2.5x9) that secure the base cover to the palm-rest and keyboard assembly.
5.
Replace the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1.
Follow the procedure in
After working inside your computer
.
Memory module
Removing the memory module
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
17