Dell Alienware x17 R2 Service Manual - Page 9
Removing and installing components, Recommended tools, Screw list
View all Dell Alienware x17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #1 ● Plastic scribe Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type M2.5x9 Quantity 2 Screw image Base cover M2.5x5, captive 4 Base cover M2.5x5 2 M.2 2230 solid-state drive M.2 2280 solid-state drive Battery M2x3 M2x3 M2x4 Rear I/O-cover M2.5x5 Wireless-card bracket Power-adapter port-bracket M2x3 M2x3 1 per solid-state drive 1 per solid-state drive 6 2 1 1 9