Dell Alienware x17 R2 Service Manual - Page 19
Steps, Next steps
View all Dell Alienware x17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Steps 1. Lift the Mylar to access the memory module. 2. Align the notch on the memory module with the tab on the memory-module slot on the system board. 3. Slide the memory module into the memory-module slot on the system board. 4. Press down on the memory module till the securing clips click, locking the memory module in place. 5. Press the Mylar back over the memory module. NOTE: Repeat steps 1 to 4 for the second memory module being installed into your computer. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 19
Steps
1.
Lift the Mylar to access the memory module.
2.
Align the notch on the memory module with the tab on the memory-module slot on the system board.
3.
Slide the memory module into the memory-module slot on the system board.
4.
Press down on the memory module till the securing clips click, locking the memory module in place.
5.
Press the Mylar back over the memory module.
NOTE:
Repeat steps 1 to 4 for the second memory module being installed into your computer.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
19