Dell Alienware x17 R2 Service Manual - Page 49
Keyboard-controller board, Removing the keyboard-controller board, Next steps, Prerequisites
View all Dell Alienware x17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3. Connect the touchpad-light cable to the touchpad assembly and close the latch. 4. Replace the four screws (M1.6x2) that secure the touchpad assembly to the palm-rest and keyboard assembly. 5. Place the touchpad cable on the touchpad, connect the cable to the keyboard-controller board and touchpad and close the latches. 6. Place the keyboard-controller board on the palm-rest and keyboard assembly, connect the cable to the keyboard-controller board and system board and close the latches. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Keyboard-controller board Removing the keyboard-controller board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the battery. About this task The following image(s) indicate the location of the keyboard-controller board and provides a visual representation of the removal procedure. 49