Dell Alienware x17 R2 Service Manual - Page 64
Palm-rest and keyboard assembly
View all Dell Alienware x17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Steps 1. Place the I/O board on the palm-rest and keyboard assembly and align the screw holes on the I/O board to the screw holes on the palm-rest and keyboard assembly. 2. Replace the four screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. Next steps 1. Install the system board. 2. Install the heat pipe. 3. Install the left fan. 4. Install the right fan. 5. Install the headset port. 6. Install the power-adapter port. 7. Install the rear-I/O cover. 8. Install the battery. 9. Install the base cover. 10. Follow the procedure in After working inside your computer. Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the memory module. 4. Remove the battery. 5. Remove the rear-I/O cover. 6. Remove the power-adapter port. 7. Remove the headset port. 8. Remove the speakers. 64