Dell Alienware x17 R2 Service Manual - Page 57
Table 2. Antenna-cable color scheme, Steps, Connectors on the, wireless card, Antenna-cable color
View all Dell Alienware x17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Steps 1. Turn the system-board assembly over. 2. Install the fan and heat-sink assembly. 3. Using the two alignment posts shown in the image, place the system-board assembly on the palm-rest and keyboard assembly. NOTE: When placing the system-board assembly on the palm-rest and keyboard assembly ensure that the power button cable is placed on top of the system board. Overlooking the power-button cable connection to the system board will result in no-power failure after service. 4. Align the screw holes on the system-board assembly to the screw holes on the palm-rest and keyboard assembly. 5. Replace the four screws (M2x3) that secure the system-board and heat-sink assembly to the palm-rest and keyboard assembly. 6. Replace the screw (M2x4) that secures the system board to the palm-rest and keyboard assembly. 7. Connect the antenna cables to the wireless-card on the system board. Table 2. Antenna-cable color scheme Connectors on the wireless card Main Antenna-cable color Silkscreen marking White MAIN △ (white triangle) Auxiliary Black AUX ▲ (black triangle) 8. Place the wireless card bracket over the wireless card on the system board. 57