Dell Alienware x17 R2 Service Manual - Page 30

Power-adapter port, Removing the power-adapter port

Get Dell Alienware x17 R2 PDF manuals and user guides View all Dell Alienware x17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Steps 1. Push the rear I/O-cover into the palm-rest and keyboard assembly snapping it into place. NOTE: To avoiding damaging your computer, ensure the right and left tron-light cables are not pinched before snapping the rear I/O-cover into place. 2. Replace the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 3. Connect the left tron-light cable to the system board and close the latch. 4. Connect the right tron-light cable to the system board and close the latch. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Power-adapter port Removing the power-adapter port Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the rear-I/O cover. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Steps
1.
Push the rear I/O-cover into the palm-rest and keyboard assembly snapping it into place.
NOTE:
To avoiding damaging your computer, ensure the right and left tron-light cables are not pinched before snapping
the rear I/O-cover into place.
2.
Replace the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
3.
Connect the left tron-light cable to the system board and close the latch.
4.
Connect the right tron-light cable to the system board and close the latch.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Power-adapter port
Removing the power-adapter port
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
rear-I/O cover
.
30