Dell Force10 S25-01-GE-24T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1493
show vrrp ipv6
View all Dell Force10 S25-01-GE-24T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1493 highlights
show vrrp ipv6 e c s View the IPv6 VRRP groups that are active. If no VRRP groups are active, the FTOS returns "No Active VRRP group." Syntax show vrrp ipv6 [vrid] [interface] [brief] Parameters vrid interface brief (OPTIONAL) Enter the Virtual Router Identifier for the VRRP group to view only that group. Range: 1 to 255. (OPTIONAL) Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: E-Series Range: 1 to 255 for TeraScale • For SONET interfaces, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN interface, enter the keyword vlan followed by the VLAN ID. The VLAN ID range is from 1 to 4094. (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP groups on the E-Series. Command Modes EXEC EXEC Privilege Command History Version 8.3.2.0 Introduced Figure 64-5. Command Example: show vrrp ipv6 Force10#show vrrp ipv6 GigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net: fe80::201:e8ff:fe7a:6bb9 VRF: 0 default-vrf State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9 (local) Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec Accept Mode: FALSE, Master AdvInt: 100 centisec Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64 Virtual MAC address: 00:00:5e:00:02:ff Virtual IP address: 1::255 fe80::255 Table 64-3. Command Example Description: show vrrp ipv6 Line Beginning with Description GigabitEthernet... VRF Displays the Interface, the VRRP group ID, and the network address. If the interface is no sending VRRP packets, 0.0.0.0 appears as the network address. VRF instance to which the interface (on which the VRRP group is configured) belongs Virtual Router Redundancy Protocol (VRRP) | 1493