Dell Force10 S25-01-GE-24T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 582

www.dell.com | support.dell.com link debounce-timer e Assign the debounce time for link change notification on this interface. Syntax link debounce [milliseconds] Parameters milliseconds Enter the time to delay link status change notification on this interface. Range: 100-5000 ms • Default for copper is 3100 ms • Default for fiber is 100 ms Command Modes INTERFACE Command History Version 8.2.1.0 Version 7.6.1.0 Introduced on E-Series ExaScale Introduced on E-Series Usage Changes do not affect any ongoing debounces. The timer changes take affect from the next debounce Information onward. monitor c e s Monitor counters on a single interface or all interfaces on a line card. The screen is refreshed every 5 seconds and the CLI prompt disappears. Syntax monitor interface [interface] To disable monitoring and return to the CLI prompt, press the q key. Parameters interface (OPTIONAL) Enter the following keywords and slot/port or number information: • For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For the management port, enter the keyword managementethernet followed by the slot (0-1) and the port (0). • For a SONET interface, enter the keyword sonet followed by the slot/port. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. Command Modes EXEC EXEC Privilege Command History Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.0 Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced for E-Series Usage The delta column displays changes since the last screen refresh. Information 582 | Interfaces