Dell Force10 S25-01-GE-24T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 967

Example 2 Figure 36-3. show ip mroute snooping Command Example Force10#show ip mroute snooping IPv4 Multicast Snooping Table (*, 224.0.0.0), uptime 17:46:23 Incoming vlan: Vlan 2 Outgoing interface list: GigabitEthernet 4/13 (*, 225.1.2.1), uptime 00:04:16 Incoming vlan: Vlan 2 Outgoing interface list: GigabitEthernet 4/11 GigabitEthernet 4/13 (165.87.1.7, 225.1.2.1), uptime 00:03:17 Incoming vlan: Vlan 2 Outgoing interface list: GigabitEthernet 4/11 GigabitEthernet 4/13 GigabitEthernet 4/20 Example 3 Figure 36-4. show ip mroute Command Example Force10#show ip mroute IP Multicast Routing Table (*, 224.10.10.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/13 (1.13.1.100, 224.10.10.1), uptime 00:04:03 Incoming interface: GigabitEthernet 3/4 Outgoing interface list: GigabitEthernet 3/12 GigabitEthernet 3/13 (*, 224.20.20.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/4 Table 36-1. show ip mroute Command Example Fields Field (S,G) uptime Incoming interface Outgoing interface list: Description Displays the forwarding entry in the multicast route table. Displays the amount of time the entry has been in the multicast forwarding table. Displays the reverse path forwarding (RPF) information towards the source for (S,G) entries and the RP for (*,G) entries. Lists the interfaces that meet one of the following: • a directly connected member of the Group • statically configured member of the Group • received a (*,G) or (S,G) Join message Multicast | 967