Dell Force10 S4810P S4810 Configuration Guide, FTOS 8.3.10.1 - Page 51

View Configuration Files Configuration files have three commented lines at the beginning of the file, as shown in the example below, to help you track the last time any user made a change to the file, which user made the changes, and when the file was last saved to the startup-configuration. In the running-configuration file, if there is a difference between the timestamp on the "Last configuration change," and "Startup-config last updated," then you have made changes that have not been saved and will not be preserved upon a system reboot. FTOS#show running-config Current Configuration ... ! Version 8.2.1.0 ! Last configuration change at Thu Apr 3 23:06:28 2008 by admin ! Startup-config last updated at Thu Apr 3 23:06:55 2008 by admin ! boot system rpm0 primary flash://FTOS-EF-8.2.1.0.bin boot system rpm0 secondary flash://FTOS-EF-7.8.1.0.bin boot system rpm0 default flash://FTOS-EF-7.7.1.1.bin boot system rpm1 primary flash://FTOS-EF-7.8.1.0.bin boot system gateway 10.10.10.100 --More-- File System Management The Dell Force10 system can use the internal Flash, external Flash, or remote devices to store files. It stores files on the internal Flash by default but can be configured to store files elsewhere. To view file system information: Task View information about each file system. Command Syntax show file-systems Command Mode EXEC Privilege The output of the command show file-systems in the example below shows the total capacity, amount of free memory, file structure, media type, read/write privileges for each storage device in use. FTOS#show file-systems Size(b) Free(b) Feature Type Flags 520962048 213778432 dosFs2.0 USERFLASH 127772672 21936128 dosFs2.0 USERFLASH - - - network - - - network - - - network Prefixes rw flash: rw slot0: rw ftp: rw tftp: rw scp: You can change the default file system so that file management commands apply to a particular device or memory. Getting Started | 51