Dell Force10 S4810P S4810 Configuration Guide, FTOS 8.3.10.1 - Page 993

Manage Redundancy on an S-Series Stack Task Command Syntax Reset the current management unit, and make the standby unit the new master unit. A new standby is elected. When the former stack master comes back online, it becomes a member unit. redundancy force-failover stack-unit Prevent the stack master from rebooting after a failover. This command does not affect a forced failover, manual reset, or a stack-link disconnect. redundancy disable-auto-reboot stack-unit Display redundancy information. show redundancy Command Mode EXEC Privilege CONFIGURATION EXEC Privilege Reset a Unit on an S-Series Stack You may reset any stack unit except for the master management unit (Message 2). Message 2 Master Reset Disallowed % Error: Reset of master unit is not allowed. Task Reload a stack-unit Reload a member unit, from the unit itself Reset a stack-unit when the unit is in a problem state. Command Syntax reset stack-unit reset-self reset stack-unit {hard} Command Mode EXEC Privilege EXEC Privilege EXEC Privilege Verifying a Stack Configuration LED Status Indicators on an S4810 Stack The light of the LED status indicator on the front panel identifies the unit's role in the stack. • Off indicates the unit is a stack member. • Blinking Green indicates the unit is the stack standby. • Solid Green indicates the unit is the stack master (management unit) Stacking | 993