Dell Force10 S4810P S4810 Configuration Guide, FTOS 8.3.10.1 - Page 950

www.dell.com | support.dell.com Task Command Figure 46-5. Reading the Value of Many Managed Objects at Once > snmpwalk -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1 SNMPv2-MIB::sysDescr.0 = STRING: Dell Force10 Real Time Operating System Software Dell Force10 Operating System Version: 1.0 Dell Force10 Application Soft;ware Version: E_MAIN4.7.6.350 Copyright (c) 1999-2007 by Dell Force10 Build Time: Mon May 12 14:02:22 PDT 2008 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.6027.1.3.1 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (32920954) 3 days, 19:26:49.54 SNMPv2-MIB::sysContact.0 = STRING: Write Managed Object Values You may only alter (write) a managed object value if your management station is a member of the same community as the SNMP agent, and the object is writable. To write or write-over the value of a managed object: Task To write or write-over the value of a managed object, as shown in Figure 46-6. Command snmpset -v version -c community agent-ip {identifier.instance | descriptor.instance}syntax value Figure 46-6. Writing over the Current Value of a Managed Object > snmpset -v 2c -c mycommunity 10.11.131.161 sysName.0 s "R5" SNMPv2-MIB::sysName.0 = STRING: R5 Configure Contact and Location Information using SNMP You may configure system contact and location information from the Dell Force10 system or from the management station using SNMP. To configure system contact and location information from the Dell Force10 system: Task Identify the system manager along with this person's contact information (e.g., E-mail address or phone number). You may use up to 55 characters. Default: None Command snmp-server contact text Command Mode CONFIGURATION 950 | Simple Network Management Protocol (SNMP)