Dell Force10 Z9000 FTOS Configuration Guide for Z9000 System - Page 49

In the running-configuration file, if there is a difference between the timestamp on the "Last configuration change," and "Startup-config last updated," then you have made changes that have not been saved and will not be preserved upon a system reboot. Figure 3-5. Tracking Changes with Configuration Comments FTOS#show running-config Current Configuration ... ! Version 8.3.11.0 ! Last configuration change at Thu Apr 3 23:06:28 2008 by admin ! Startup-config last updated at Thu Apr 3 23:06:55 2008 by admin ! boot system stack-unit 0 primary flash:// FTOS-ZB-8.3.11.0.bin boot system stack-unit 0 secondary flash:// FTOS-ZB-8.3.11.1.bin boot system stack-unit 0 default system: A: boot system gateway x.x.x.x --More-- File System Management The Dell Force10 system can use the internal Flash, external Flash, or remote devices to store files. It stores files on the internal Flash by default but can be configured to store files elsewhere. To view file system information: Task View information about each file system. Command Syntax show file-systems Command Mode EXEC Privilege The output of the command show file-systems (Figure 3-6) shows the total capacity, amount of free memory, file structure, media type, read/write privileges for each storage device in use. Figure 3-6. show file-systems Command Example FTOS#show file-systems Size(b) Free(b) Feature Type Flags 520962048 213778432 dosFs2.0 USERFLASH 127772672 21936128 dosFs2.0 USERFLASH - - - network - - - network - - - network Prefixes rw flash: rw slot0: rw ftp: rw tftp: rw scp: You can change the default file system so that file management commands apply to a particular device or memory. To change the default storage location: Task Change the default directory. Command Syntax cd directory Command Mode EXEC Privilege Getting Started | 49