Dell Force10 Z9000 FTOS Configuration Guide for Z9000 System - Page 656

www.dell.com | support.dell.com Redistribute routes You can add routes from other routing instances or protocols to the OSPFv3 process. With the redistribute command syntax, you can include RIP, static, or directly connected routes in the OSPF process. Command Syntax Command Mode redistribute {bgp | connected | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] CONF-IPV6-ROUTER-OSPF Usage Specify which routes will be redistributed into OSPF process. Configure the following required and optional parameters: • bgp, connected, or static: enter one of the keyword to redistribute those routes. • metric metric-value range: 0 to 4294967295. • metric-type metric-type: 1 for OSPFv3 external route type 1 OR 2 for OSPFv3 external route type 2. • route-map map-name: enter a name of a configured route map. • tag tag-value range: 0 to 4294967295. Configure a default route Configure FTOS to generate a default external route into the OSPFv3 routing domain. Command Syntax default-information originate [always [metric metric-value] [metric-type type-value]] [route-map map-name] Command Mode CONF-IPV6-ROUTER-OSPF Usage Specify the information for the default route. Configure the following required and optional parameters: • always: indicate that default route information must always be advertised • metric metric-value range: 0 to 4294967295. • metric-type metric-type: 1 for OSPFv3 external route type 1 OR 2 for OSPFv3 external route type 2. • route-map map-name: enter a name of a configured route map. 656 | Open Shortest Path First (OSPFv2 and OSPFv3)