Dell Force10 Z9000 FTOS Configuration Guide for Z9000 System - Page 628

www.dell.com | support.dell.com • Network Summary (type 3) • AS Boundary (type 4) • AS External (type 5) • NSSA External (type 7) • Link LSA, OSPFv3 only (type 8) • Opaque Link-local (type 9) • Grace LSA, OSPFv3 only (type 11) Graceful Restart c e s Graceful Restart for OSPFv2 is supported on modes and is supported on z platforms in Helper mode only. platforms in Helper and Restart e Graceful Restart for is supported on z OSPFv3 is supported on platforms in Helper mode t only. platforms in Helper and Restart modes and When a router goes down without a Graceful Restart, there is a possibility for loss of access to parts of the network due to ongoing network topology changes. Additionally, LSA flooding and reconvergence can cause substantial delays. It is, therefore, desirable that the network maintain a stable topology if it is possible for data flow to continue uninterrupted. OSPF Graceful Restart recognizes the fact that in a modern router, the control plane and data plane functionality are separate, restarting the control plane functionality (such as the failover of the active RPM to the backup in a redundant configuration), does not necessarily have to interrupt the forwarding of data packets. This behavior is supported because the forwarding tables previously computed by an active RPM have been downloaded into the Forwarding Information Base on the line cards (the data plane), and are still resident. For packets that have existing FIB/CAM entries, forwarding between ingress and egress ports/VLANs etc., can continue uninterrupted while the control plane OSPF process comes back to full functionality and rebuilds its routing tables. When a router is attempting to restart gracefully, it originates the following link-local Grace LSAs to notify its helper neighbors that the restart process is beginning: • An OSPFv2 router sends Type 9 LSAs. • An OSPFv3 router sends Type 11 LSAs. Type 9 and 11 LSAs include a grace period, which is the time period an OSPF router advertises to adjacent neighbor routers as the time to wait for it to return to full control plane functionality. During the grace period, neighbor OSPFv2 /v3 interfaces save the LSAs from the restarting OSPF interface. Helper neighbor routers continue to announce the restarting router as fully adjacent, as long as the network topology remains unchanged. When the restarting router completes its restart, it flushes the Type 9 and 11 LSAs, thereby notifying its neighbors that the restart is complete. This should happen before the grace period expires. Dell Force10 routers support the following OSPF graceful restart functionality: • Restarting role in which a router is enabled to perform its own graceful restart. 628 | Open Shortest Path First (OSPFv2 and OSPFv3)