Dell Latitude E5540 Dell Owners Manual - Page 15

Installing the Camera, Removing the Keyboard Trim, Installing the Keyboard Trim, Removing

Get Dell Latitude E5540 PDF manuals and user guides View all Dell Latitude E5540 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Installing the Camera 1. Place the camera and microphone module on its place. 2. Connect the camera cable. 3. Tighten the screw to secure the camera and microphone module. 4. Install: a) display bezel b) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Keyboard Trim 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Perform the following steps: a) Remove the screw that secures the keyboard trim at the back of the computer. b) Pry up the keyboard trim on its sides and the top edge. c) Lift upwards and remove the keyboard trim from the computer. Installing the Keyboard Trim 1. Align the keyboard trim to its place. 2. Press along the sides of the keyboard trim until it snaps in place. 3. Tighten the screw at the back of the computer to secure the keyboard trim. 4. Install the battery. 5. Follow the procedures in After Working Inside Your Computer. Removing the Keyboard 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Installing the Camera
1.
Place the camera and microphone module on its place.
2.
Connect the camera cable.
3.
Tighten the screw to secure the camera and microphone module.
4.
Install:
a)
display bezel
b)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard Trim
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the battery.
3.
Perform the following steps:
a)
Remove the screw that secures the keyboard trim at the back of the computer.
b)
Pry up the keyboard trim on its sides and the top edge.
c)
Lift upwards and remove the keyboard trim from the computer.
Installing the Keyboard Trim
1.
Align the keyboard trim to its place.
2.
Press along the sides of the keyboard trim until it snaps in place.
3.
Tighten the screw at the back of the computer to secure the keyboard trim.
4.
Install the battery.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
15