Dell Latitude E5540 Dell Owners Manual - Page 32
Removing the I/O Board (Right), Installing the I/O Board (Right
View all Dell Latitude E5540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
o) SD card 4. Follow the procedures in After Working Inside Your Computer. Removing the I/O Board (Right) 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) SD card b) battery c) base cover d) keyboard trim e) keyboard f) memory g) optical drive h) hard drive i) hard-drive cage j) WLAN card k) display hinge l) palmrest m) system fan n) ExpressCard cage o) system board 3. Perform the following steps: a) Remove the screws that secure the I/O board on the computer. b) Lift the I/O board and remove from the computer. Installing the I/O Board (Right) 1. Place the I/O board on the computer. 2. Tighten the screws to secure the I/O board to the computer. 3. Install: a) system board b) ExpressCard cage c) system fan 32
o)
SD card
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the I/O Board (Right)
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
SD card
b)
battery
c)
base cover
d)
keyboard trim
e)
keyboard
f)
memory
g)
optical drive
h)
hard drive
i)
hard-drive cage
j)
WLAN card
k)
display hinge
l)
palmrest
m)
system fan
n)
ExpressCard cage
o)
system board
3.
Perform the following steps:
a)
Remove the screws that secure the I/O board on the computer.
b)
Lift the I/O board and remove from the computer.
Installing the I/O Board (Right)
1.
Place the I/O board on the computer.
2.
Tighten the screws to secure the I/O board to the computer.
3.
Install:
a)
system board
b)
ExpressCard cage
c)
system fan
32