Dell Latitude E5540 Dell Owners Manual - Page 36

Installing the Status-Light Board, ExpressCard cage

Page 36 highlights

h) hard drive i) hard-drive cage j) WLAN card k) display hinge l) palmrest m) system fan n) ExpressCard cage o) system board p) speakers 3. Perform the following steps: a) Remove the screw that secures the LED cover. b) Un-route the status-light board cable from its channels. c) Remove the screw that secures the status-light board and lift to remove the status-light board from the computer. Installing the Status-Light Board 1. Place the status-light board on its place on the computer. 2. Connect the status-light board cable to its connector. 3. Tighten the screw to secure the status-light board on the computer. 4. Place the LED cover on the status-light board. 5. Install: 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61

h)
hard drive
i)
hard-drive cage
j)
WLAN card
k)
display hinge
l)
palmrest
m)
system fan
n)
ExpressCard cage
o)
system board
p)
speakers
3.
Perform the following steps:
a)
Remove the screw that secures the LED cover.
b)
Un-route the status-light board cable from its channels.
c)
Remove the screw that secures the status-light board and lift to remove the status-light board
from the computer.
Installing the Status-Light Board
1.
Place the status-light board on its place on the computer.
2.
Connect the status-light board cable to its connector.
3.
Tighten the screw to secure the status-light board on the computer.
4.
Place the LED cover on the status-light board.
5.
Install:
36