Dell Latitude E5540 Dell Owners Manual - Page 26

Removing the System Fan, Installing the System Fan

Get Dell Latitude E5540 PDF manuals and user guides View all Dell Latitude E5540 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

f) battery g) SD card 4. Follow the procedures in After Working Inside Your Computer. Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) SD card b) battery c) base cover d) keyboard trim e) keyboard f) memory g) optical drive h) hard drive i) hard-drive cage j) display hinge k) palmrest 3. Perform the following steps: a) Disconnect the I/O board cable and system-fan cable [1] and [2]. b) Remove the screws that secure the system fan and lift to remove the system fan from the computer. Installing the System Fan 1. Place the system fan on the computer. 2. Connect the system-fan cable to the system board. 3. Connect the I/O board cable to its connector. 4. Tighten the screws to secure the system fan on the computer. 5. Install: a) palmrest b) display hinge c) memory d) hard-drive cage e) hard drive 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
f)
battery
g)
SD card
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
SD card
b)
battery
c)
base cover
d)
keyboard trim
e)
keyboard
f)
memory
g)
optical drive
h)
hard drive
i)
hard-drive cage
j)
display hinge
k)
palmrest
3.
Perform the following steps:
a)
Disconnect the I/O board cable and system-fan cable [1] and [2].
b)
Remove the screws that secure the system fan and lift to remove the system fan from the
computer.
Installing the System Fan
1.
Place the system fan on the computer.
2.
Connect the system-fan cable to the system board.
3.
Connect the I/O board cable to its connector.
4.
Tighten the screws to secure the system fan on the computer.
5.
Install:
a)
palmrest
b)
display hinge
c)
memory
d)
hard-drive cage
e)
hard drive
26