Dell Latitude E5540 Dell Owners Manual - Page 23
Installing the Display Hinge, Removing the Palmrest - keyboard removal
View all Dell Latitude E5540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing the Display Hinge 1. Place the display hinge on the computer. 2. Tighten the screws to secure the display hinge at the front and back of the computer. 3. Install: a) keyboard b) keyboard trim c) base cover d) battery 4. Follow the procedures in After Working Inside Your Computer. Removing the Palmrest 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) SD card b) battery c) base cover d) keyboard trim e) keyboard f) memory g) optical drive h) hard drive i) hard-drive cage j) display hinge 3. Remove the screws at the back of the computer and disconnect: a) power-connector cable [1] and [2] b) media-buttons cable [1] and [2] c) touch-pad cable [1] and [2] d) fingerprint-scanner cable [1] and [2] 23
Installing the Display Hinge
1.
Place the display hinge on the computer.
2.
Tighten the screws to secure the display hinge at the front and back of the computer.
3.
Install:
a)
keyboard
b)
keyboard trim
c)
base cover
d)
battery
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Palmrest
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
SD card
b)
battery
c)
base cover
d)
keyboard trim
e)
keyboard
f)
memory
g)
optical drive
h)
hard drive
i)
hard-drive cage
j)
display hinge
3.
Remove the screws at the back of the computer and disconnect:
a)
power-connector cable [1] and [2]
b)
media-buttons cable [1] and [2]
c)
touch-pad cable [1] and [2]
d)
fingerprint-scanner cable [1] and [2]
23