Dell Latitude E5540 Dell Owners Manual - Page 16

Installing the Keyboard, with the computer.

Get Dell Latitude E5540 PDF manuals and user guides View all Dell Latitude E5540 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

b) keyboard trim 3. Perform the following steps: a) Remove the screws at the back of the computer and flip the computer over. b) Remove the screws that secure the keyboard to the computer. 4. Perform the following steps: a) Slide the keyboard and flip the keyboard over [1] and [2] b) Disconnect the keyboard cable [1] and [2] and lift the keyboard to remove from the computer [3]. Installing the Keyboard 1. Connect the keyboard cable to the keyboard. 2. Place the keyboard into its place until all the metal tabs fit into their positions. 3. Press down on the keyboard to the left and right side ensuring that all the snaps are fully engaged with the computer. 4. Install the screws to secure the keyboard to the palmrest. 5. Install the screws at the back of the computer. 6. Install: a) keyboard trim b) battery 7. Follow the procedures in After Working Inside Your Computer. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
b)
keyboard trim
3.
Perform the following steps:
a)
Remove the screws at the back of the computer and flip the computer over.
b)
Remove the screws that secure the keyboard to the computer.
4.
Perform the following steps:
a)
Slide the keyboard and flip the keyboard over [1] and [2]
b)
Disconnect the keyboard cable [1] and [2] and lift the keyboard to remove from the computer
[3].
Installing the Keyboard
1.
Connect the keyboard cable to the keyboard.
2.
Place the keyboard into its place until all the metal tabs fit into their positions.
3.
Press down on the keyboard to the left and right side ensuring that all the snaps are fully engaged
with the computer.
4.
Install the screws to secure the keyboard to the palmrest.
5.
Install the screws at the back of the computer.
6.
Install:
a)
keyboard trim
b)
battery
7.
Follow the procedures in
After Working Inside Your Computer
.
16