Dell blcwxfg User Guide - Page 165
Installing a Bluetooth Card, and sliding the card out of the caddy.
View all Dell blcwxfg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
1 captive screw 3 cable connector 5 plastic securing tab 2 card caddy 4 plastic alignment tab 6 Bluetooth card NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components. 4 Loosen the captive screw and, lifting the end with the captive screw first, gently remove the card caddy from your Tablet-PC. If a card is installed in the card caddy, ensure that excessive force is not applied to the connecting cable. 5 If a card is installed in the card caddy, disconnect the cable from the card. Remove the card from the card caddy by gently lifting the plastic securing tab and sliding the card out of the caddy. 6 If no card was installed in the card caddy, find the cable in the space opened by removing the card caddy and gently lift the connector end out so that it is accessible. Installing a Bluetooth Card NOTICE: Before touching anything inside your Tablet-PC, ground yourself by touching an unpainted metal surface, such as the metal at the back of your Tablet-PC. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components. 1 Seat the Bluetooth card into the card caddy, sliding the corner with the hole under the plastic securing tab. The connector end of the card should be pointing away from the card caddy end with the captive screw. 2 Connect the Bluetooth card cable to the card. 3 Fold the excess cable as shown in the picture below and hold it next to the card. Adding and Replacing Parts 165