Dell blcwxfg User Guide - Page 191
Installing the System Board, Fan, Removing the Fan
View all Dell blcwxfg manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
9 Disconnect the pen indicator cable from the system board. 10 Remove the M2.5 x 5-mm screw marked with a silver triangle. 11 Remove the system board from the base, lifting from right to left, and set the system board aside. Installing the System Board 1 Seat the system board into the base from left to right. 2 Tighten the M2.5 x 5-mm screw into the screw hole marked with a silver triangle on the system board. 3 Connect the pen indicator cable to the system board. 4 Connect the wireless switch cable to the system board. 5 Replace the speaker module: a Lower the speaker into the base. b Connect the speaker cable to the speaker system board connector. 6 Install the palm rest (see "Installing the Palm Rest" on page 189). 7 Install any Mini-Cards (see "Installing a Mini-Card" on page 173). 8 Install the keyboard (see "Installing the Keyboard" on page 177). 9 Install the display assembly (see "Installing the Display Assembly" on page 182). 10 Install the hinge cover (see "Installing the Hinge Cover" on page 175). Fan CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the Tablet-PC. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the Tablet-PC. Removing the Fan 1 Follow the procedures in "Before You Begin" on page 155. Adding and Replacing Parts 191